[Free] 2018(May) Dumps4cert Pass4sure Cisco 400-151 Dumps with VCE and PDF Download 111-120

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Cisco Official New Released 400-151
100% Free Download! 100% Pass Guaranteed!

CCIE Data Center (v2.0)

Question No: 111 – (Topic 2)

When using Overlay Transport Virtualization (OTV), how do L2 multicast frames traverse the overlay?

  1. The L2 multicast frames are encapsulated in an OTV packet using the configured control-group multicast address for transport

  2. The L2 multicast frames are dropped because multicast cannot be carried across the overlay

  3. The L2 multicast frames are encapsulated in an OTV packet using the configured data- group multicast address for transport

  4. The L2 multicast frames are forwarded natively across the overlay based on their multicast IDs

Answer: C

Question No: 112 – (Topic 2)

Which Cisco Nexus 1000v Switch CLI command is used to verify the connection between the Cisco Nexus 1000v Series Switch and VMware?

  1. show module

  2. show svs domain

  3. show svd domain

  4. show svs connections

  5. show svd console Answer: D

Question No: 113 – (Topic 2)

Which three options can be used to add a device as a member to a zone? (Choose 3)

  1. Fibre Channel ID

  2. IP address

  3. LUN ID

  4. fully qualified domain name

  5. device alias

  6. VLAN ID

Answer: A,C,E

Question No: 114 – (Topic 2)

Which two actions are used by the OT\/join interface on an edge device? (Choose 2)

  1. Join the overlay network and discover the other remote OT\/ edge devices.

  2. Form OTV adjacencies with the other OTV edge devices that belong to the same VPN

  3. Send/receive only multicast traffic.

  4. Forward Layer 2 frame destined for a remote site an overlay interface.

  5. Only receive MAC reachability information.

Answer: A,B

Question No: 115 – (Topic 2)

Refer to the exhibit. When the engineer tried to check CoPP on the switch, the engineer observed the error that is shown in the exhibit. Which option describes the reason for the displayed output?

Dumps4Cert 2018 PDF and VCE

  1. The Cisco NX-OS version that is running does not support CoPP.

  2. The CoPP feature is not enabled on this switch.

  3. The CoPP CLI is available from the default VDC

  4. CoPP is enabled by default but not configured.

Answer: C

Question No: 116 – (Topic 2)

Which three statements about the VLAN Trunking Protocol version 3 are true? (Choose 3)

  1. It allows only the primary server to make VLAN Trunking Protocol configuration changes.

  2. It supports 4K VLANs.

  3. It is not compatible with VLAN Trunking Protocol version 1 or 2.

  4. It does not support private VLANs.

  5. It provides enhanced security with hidden and secret passwords.

  6. It supports manual configuration of VLANs on a device configured as a VLAN Trunking Protocol client.

Answer: A,B,E

Question No: 117 – (Topic 2)

Refer to the exhibit. Which two things can be determined from the SEL log output? (Choose two.)

Dumps4Cert 2018 PDF and VCE

  1. The server experienced a crash.

  2. The server experienced correctable memory errors.

  3. DIMMs in channel 2 are experiencing memory errors.

  4. DIMMs in channel 0 are experiencing memory errors.

  5. Memory errors have crossed two thresholds.

Answer: B,E

Question No: 118 – (Topic 2)

Refer to exhibit.

Dumps4Cert 2018 PDF and VCE

Which option describes what happens to a packet with an MTU of 2158 when it is switched from E1/1 to E1/2?

C:\Users\Raiy\Pictures\39.jpg

  1. It is punted to the CPU.

  2. It is dropped.

  3. It is fragmented.

  4. It is forwarded with no fragmentation. Answer: D

Question No: 119 – (Topic 2)

Which three CLI configuration commands are for port profile as a private VLAN on Cisco Nexus 1000V Series switch? (Choose three.)

  1. Switch (config-port-prof)# switchport private-vlan trunk allowed vlan vlan-range

  2. Switch (Config)# port-profiletypevethernetname

  3. Switch (config-port-prof)# switchport mode private-vlan host promiscuous

  4. Switch (config-port-prof)# switchport Private-vlan mapping primary_Vlan add secondary_vlan

  5. Switch (config-port-prof)# switchport Private-vlan host-association primary-vlan secondary-vlan

Answer: A,D,E Explanation:

Ref:http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1

_4/port_profile/configuration/guide/n1000v_port_profile/n1000v_portprof_6pvlan.html

Question No: 120 – (Topic 2)

In a high availability environment with two Fabric Interconnects, you can run a separate of Cisco UCS manager on each Fabric Interconnect. The Cisco UCS Manager on the primary Fabric Interconnect acts the primary management instance, and the Cisco UCS Manager on the other Fabric Interconnect is the subordinate management instance. Which of the following statements is true in regards to Fabric Interconnect management instance?

  1. The two instances of Cisco UCS Manager across a private network MGMT0 and MGMT1 Ethernet ports on the Fabric Interconnects.

  2. The two instances of Cisco UCS Manager across a private network L1 and L2 Ethernet ports on the Fabric Interconnects.

  3. The two instances of Cisco UCS Manager across a management network MGMT0 and MGMT1 Ethernet ports on the Fabric Interconnects.

  4. The two instances of Cisco UCS Manager across a management network L1 and L2 Ethernet ports on the Fabric Interconnects.

Answer: B

100% Dumps4cert Free Download!
Download Free Demo:400-151 Demo PDF
100% Dumps4cert Pass Guaranteed!
Download 2018 Dumps4cert 400-151 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No