AZURE, MCSE, MCSA,CCNA, CCNP, CCIE, A+ Practice Tests | Exam Questions

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.391When troubleshooting ATM, which command would allow you to test reachability from one side of an ATM cloud to the other?ping atm vci 0.100 interface at-0/1/0 end-to-endping atm vci 0.100 interface at-0/1/0 circuitping atm vci 0.100 interface at-0/1/0 far-endping atm vci 0.100 interface at-0/1/0 final-hopCorrect Answer: A Question No.392What are three advantages which dynamic routing protocols offer over static routing Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.351Which command configures an address of 192.168.1.1 with a mask of 255.255.255.0 on interface ge-0/0/0?A. set ip interface ge-0/0/0 address 192.168.1.1 255.255.255.0B. set ip interface ge-0/0/0 address 192.168.1.1/24C. set interface ge-0/0/0 ip4 address 192.168.1.1 mask 255.255.255.0D. set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24Correct Answer: DExplanation:The following configuration is sufficient Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.361What is the name of the volume containing the software and files used for the day-to-day operation of a device using Junos with upgraded FreeBSD?/var/active/junos/oamCorrect Answer: C Question No.362Given the host IP address of 192.168.100.60 and a network mask of 255.255.255.224 (or /27), which address represents the correct network address for the referenced host?A.192.168.100.48B.192.168.100.16C.192.168.100.0D.192.168.100.32Correct Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.371What are three benefits of using a dynamic routing protocol? (Choose three.)increased network securitydecreased network latencyincreased network availabilitygreater network scalabilitylower administrative overheadCorrect Answer: CDE Question No.372What are the usable hosts on the 192.168.1.24/29 network?.24 through .48.24 through .32.25 through .30.35 through .31Correct Answer: CExplanation:The minimum host address Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.381Which two commands will provide the current configuration of the MX1-PE1 BGP group on your router? (Choose two.)user@router# show groups | display set | match MX1-PE1user@router# show | display set | match MX1-PE1user@routergt; show configuration | match set | match MX1-PE1user@routergt; show configuration | dispaly set | match MX1-PE1Correct Answer: BD Question No.382The PFE receives which two tables from the RE? Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.321Which two statements are correct about the request system zeroize local command? (Choose two.)The command preserves the management interface addresses.The command resets all key values.The command removes all data files.The command removes all user-created files from the system.Correct Answer: BD Question No.322You have configured logging to the console port but are uncertain of the impact to the device while troubleshooting. Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.331Which statement is correct regarding exception traffic on Junos devices?The Junos OS does not provide congestion control for exception traffic sent to the RE.The built-in rate limiter for exception traffic is configurable.All exception traffic destined for the RE is sent over the out-of-band management link.The Junos OS has a built-in rate limiter for exception traffic.Correct Answer: D Question No.332You must configure Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.341Which CIDR notation is the equivalent of the subnet mask of 255.255.192.0?A./19B./18C./20D./17Correct Answer: B Question No.342Which three SONET network elements are used for troubleshooting? (Choose three.)linepathcircuitsectionsegmentCorrect Answer: ABDExplanation:Section, line, and path errors occur over different spans of the SONET network and between different pieces of equipment.References:http://www.juniper.net/documentation/en_US/junos15.1/topics/topic-map/sonetinterfaces-alarms- Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.311What is the purpose of a network mask?It is used to identify the maximum hop count of a subnetwork.It is used to identify an IP address as either private or public.It is used to identify the network to which an IP address belongs.It is used to identify the total number of bits present in an IP address.Correct Answer: C Question No.312 Exhibit user@router# run show route /24inet.0: 142 destinations, 142 routes (141 Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.271What is the default import routing policy for OSPF?Accept all OSPF routes and install them into the inet.3 routing table.Accept all OSPF routes and install them into the inet7.0 routing table.Accept all OSPF routes and install them into the inet4.0 routing table.Accept all OSPF routes and install them into the inet.0 routing table.Correct Answer: D Question No.272What represents the binary equivalence of 96?A.11010100B.01100000C.11010000D.11101010Correct Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.281Which statement describes an advantage of dynamic routing?Dynamic routing is typically more scalable when compared to static routing.Unlike static routing, dynamic routing requires no initial user configuration.Unlike static routing, dynamic routing provides redundant IP addresses for end-user devices.Dynamic routing provides DNS services along with IP connectivity, whereas static routing does not.Correct Answer: Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.291Which statement is true about a routing table?It contains routes learned dynamically only.It finds the best path to each destination by using a modified shortest-path-first calculation.It contains only active BGP routes.It contains all accepted routes to all destinations.Correct Answer: D Question No.292What is the decimal equivalent of 10101010?A.182B.180C.172D.170Correct Answer: D Question No.293Which command do Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.301 Exhibit user@routergt; show routeinet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden) = Active Route, – = Last Active, * = Both 10.10.10.91/32 *[Direct/0] 00:09:40gt;via lo0.010.10.10.92/32 *[OSPF/10] 00:01:50, metric 1gt;to 172.16.1.2 via ge-0/0/2.0 100.100.1.0/24 *[Static/5] 00:01:50Reject172.16.1.0/24 *[Direct/0] 00:06:09gt;via ge-0/0/2.0172.16.1.1/32 *[Local/0] 00:06:09Local via ge-0/0/2.0192.168.0.0/16 Read more […]

Get Full Version of the Examhttp://www.EnsurePass.com/JN0-102.html Question No.241Referring to the exhibit, you want to block HTTP access to Web-Server from the subnet where Mal-User is located. All other traffic should be permitted. Which firewall filter configuration do you use?[edit firewall family inet filter STOP-MAL-USER] user@router# show term one {from {source-address { 200.200.200.0/24;}destination-address { 100.100.100.10/32;}protocoltcp; destination-port http;}then accept;}term two Read more […]